, .

PS90 Compensator & Muzzle Brakes for 16″ Threaded Shroud or SBR Kit

$74.99

PS90 Compensator

PS90 Compensator & Muzzle Brakes for 16″ Threaded Shroud or SBR Kit

PS90 16″ Threaded Barrel Shroud Allows for Additional of a PS90 Compensator or Muzzle Brake
ps90 compensator

PS90 Compensator is a must have for any threaded barrel installed on the PS90. Whether you choose the 16″ Threaded Barrel Shroud or the 10.4″ SBR Barrel Kit, a PS90 Compensator will allow the gasses to be expelled in the proper direction to reduce recoil and muzzle rise even more then the firearm is designed to do. It fits on any 1/2 x 28mm thread which both the 16″ threaded shroud and the 10.4″ SBR Barrel Kit provide. There are also muzzle brake options that act as flash hiders as well. You can get the benefit of reduced recoil, less muzzle rise and a hidden flash. This allows you to remain as stealth as possible if you are ever engaged in a combat situation.  There are a variety of different PS90 Compensator and PS90 Muzzle Brakes available, but many of them are designed just for looks and not to improve the function of the gun. We offer the CMMG PS90 Compensator which is typically used in conjunction with the CMMG SBR Kit. This PS90 Compensator can also be used on the 16″ Threaded barrel shroud offered exclusively from FN57SALE. It adds functionality to the rifle while making it look a lot nicer then just bare threads at the end of the barrel. The same concept applies with the PS90 SBR Kit. You want a compensator at the end of the SBR Kit to allow a nicer looking rifle but also to direct the gasses up and keep the muzzle on target as much as possible. I would not have a threaded barrel on my PS90 without a PS90 Compensator.

The PS90 Muzzle Break offered by FN57SALE is a 4.5″ brake used in conjunction with our 16″ Threaded Barrel Shroud to make any standard PS90 into a California Compliant PS90. This increases the overall length to 30″ which is required by the California Department of Justice, but new legislation which will begin in 2017 will prevent any rifles with removable magazines to be purchased in the state. Sorry guys, but your state is ridiculous!

For more information visit Burris Website to see the variations in MOA and different options between the models to make sure to choose the best fit for your needs.

FN57SALE is a proud distributor of CMMG PS90 Products

Add 16″ Threaded Barrel Shroud

ps90 threaded barrel shroud
Adds threads to Factory Barrel by swapping out the barrel shrouds

Add 10.4″ SBR KIT

ps90 sbr kit
ALL NFA RULES APPLY. Do not install SBR kit until receiving your form 1 back from the ATF. We can install the kit for you with proof of stamp and by shipping the upper receiver to us.

PS90 Compensator

PS90 Compensator & Muzzle Brakes for 16″ Threaded Shroud or SBR Kit

PS90 16″ Threaded Barrel Shroud Allows for Additional of a PS90 Compensator or Muzzle Brake

ps90 compensator

PS90 Compensator is a must have for any threaded barrel installed on the PS90. Whether you choose the 16″ Threaded Barrel Shroud or the 10.4″ SBR Barrel Kit, a PS90 Compensator will allow the gasses to be expelled in the proper direction to reduce recoil and muzzle rise even more then the firearm is designed to do. It fits on any 1/2 x 28mm thread which both the 16″ threaded shroud and the 10.4″ SBR Barrel Kit provide. There are also muzzle brake options that act as flash hiders as well. You can get the benefit of reduced recoil, less muzzle rise and a hidden flash. This allows you to remain as stealth as possible if you are ever engaged in a combat situation.  There are a variety of different PS90 Compensator and PS90 Muzzle Brakes available, but many of them are designed just for looks and not to improve the function of the gun. We offer the CMMG PS90 Compensator which is typically used in conjunction with the CMMG SBR Kit. This PS90 Compensator can also be used on the 16″ Threaded barrel shroud offered exclusively from FN57SALE. It adds functionality to the rifle while making it look a lot nicer then just bare threads at the end of the barrel. The same concept applies with the PS90 SBR Kit. You want a compensator at the end of the SBR Kit to allow a nicer looking rifle but also to direct the gasses up and keep the muzzle on target as much as possible. I would not have a threaded barrel on my PS90 without a PS90 Compensator.

The PS90 Muzzle Break offered by FN57SALE is a 4.5″ brake used in conjunction with our 16″ Threaded Barrel Shroud to make any standard PS90 into a California Compliant PS90. This increases the overall length to 30″ which is required by the California Department of Justice, but new legislation which will begin in 2017 will prevent any rifles with removable magazines to be purchased in the state. Sorry guys, but your state is ridiculous!

For more information visit Burris Website to see the variations in MOA and different options between the models to make sure to choose the best fit for your needs.

FN57SALE is a proud distributor of CMMG PS90 Products

Additional information

Weight 2 lbs
Add Ons

16" PS90 Threaded Barrel Shroud, PS90 10.4" SBR Kit

Reviews

There are no reviews yet.

Be the first to review “PS90 Compensator & Muzzle Brakes for 16″ Threaded Shroud or SBR Kit”

Your email address will not be published. Required fields are marked *

%d bloggers like this: