, , , .

EFFEN 90 – Precision Cut PS90 Billet Stripped Upper Receiver or Converted Rifle

$349.99$2,649.99

EFFEN 90 Precision Cut PS90 Billet Receiver or Full Rifle Build

screen-shot-2017-02-22-at-5-55-56-amBuild The PS90 You Have Always Dreamed About!

EFFEN 90 PS90 Custom Billet Receiver is one of those upgrades that will make your PS90 look and perform like a completely different firearm. The EFFEN 90 is an entire upper receiver with its own unique serial number that is as replacement for the Factory FN upper receiver. You have two configurations with the EFFEN 90.  

  1. We can keep the PDS90 a rifle and remove the existing front shroud which will allow us to remove the barrel, spring and charging handle. We then replace the old FN upper receiver with the new EFFEN 90 Billet Receiver and reinstall the 16″ barrel along with the original charging handles and a new 16″ threaded barrel shroud which will add 1/2 x 28mm threads to the front of the 16″ barrel. This option does not require any NFA paperwork but will require the firearm be shipped to an FFL because it is technically a “new firearm” with the new serial number.
  2. If you want to SBR the EFFEN 90, have already applied for the stamp via form 1 or have received the stamp from the ATF and would like to use the EFFEN 90 receiver and SBR kit we can do the conversion for you. We always stock the CMMG PS90 SBR Kit which will require us to remove the original barrel shroud, remove all the parts off the original upper receiver, and swap the parts from the old receiver to the new EFFEN 90. Along with the parts swap we would install the 10.4″ barrel and receiver and PS90 Compensator if desired. If using a firearms trust then laser engraving of the trust name and county is required per ATF rules.
    effen 90

The EFFEN 90 uses the same action and lower assembly as the regular PS90 chambered in the 5.7x28mm cartridge, the FN PS90 utilizes blowback operation and fires from a closed bolt for greater accuracy and reliability. EFFEN 90 PS90 civilian legal 16.04″ cold hammer-forged MIL-SPEC barrel shroud must be removed to change the upper receiver, so a new 16″ threaded barrel shroud is installed which allows you to add a suppressor or muzzle brake to the end of the barrel. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the EFFEN 90 PS90 fully ambidextrous. Models with 10 , 30 or 50 round polymer detachable magazines are available.

EFFEN 90 PS90 can be upgraded to be one of the baddest firearms ever built, and the upgrades available from FN57SALE are some of the best upgrades available in the entire country. The items listed below have all been personally tested and approved by Matt Adika. In order to be listed on this page, the accessories must meet strict quality control standards like all our accessories, we only sell the highest quality upgrades available for our firearms. You can be assured that when ordering P90 Accessories from our site, that what you purchase will last and work the way it is described every time. All accessories are installed by a FN Certified Gunsmith and tested before we ship the firearm out. Completely customize your rifle anyway you want, with hundreds of different configurations available. The new short stroke hammer and extended magazine release are a must have! Make sure you have extra magazines with upgraded rollers as well. Enjoy!

Clear

Remove Parts From Factory Receiver and Swap to EFFEN 90

ps90 threaded barrel shroudps90 sbr barrel kit

Add Compensator to Threaded Barrel or SBR Barrel

Installing SBR or Barrel Shroud does not come with thread protector, this item recommended.
ps90 compensator

Optics

ps90 red dotps90 red dotps90 red dot
*If you order a cheek rest we will automatically change the low profile mount to a higher profile mount so your line of sight is correct.
*Recommended

PS90 Short Stroke Gen 1 Hammer (installed)

ps90 gen 1 trigger

PS90 Extended Charging Handle (installed)

ps90 extended charging handle

Tactical Bungee Sling – Best Sling Available

scar-one-point-sling-qd

PS90 Extended Magazine Release (installed)

ps90 extended magazine release

PS90 Magazine Derlin Rollers

ps90 mag rollers

This must be a number!

This must be a number!

Duracoat/Hydrodip Frame to color of your choice

ps90 duracoatps90 hydrodip

Duracoat/Hydrodip Additional Parts

ps90 hydrodipps90 hydrodip

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

Laser/Light

fn five seven laser light
*Recommended

Pelican Case

Small:Scar-Pelican-caseScar-Pelican-case

Medium:Scar-Pelican-caseScar-Pelican-case

Large:Scar-Pelican-caseScar-Pelican-case

ALL PRICES INCLUDE ADDITIONAL $50 FOR SHIPPING FOR WEIGHT OF THE PELICAN CASE

Choose Suppressor w/ Free Firearms Trust Template

fn five seven suppressor
Suppressors are regulated under the National Firearms Act and require a local Class III dealer to receive the suppressor and file the required Form 4 paperwork with the ATF. If you do not have a firearms trust or are unfamiliar with the process, we will guide you through the process and help you through the steps to become eligible to own a suppressor. Keep in mind we are not NFA attorneys and cannot give legal advice, we can only give you what the ATF allows us to do under the law as Class III SOT Dealers and the guidance to complete the transaction.

Upgrade IA Suppressor to Titanium?

IA Suppressors are made out of Stainless Steel, if you would like to upgrade the suppressor to Titanium select this option. (only applicable to the Slingshot)
fn 57 suppressor
*Recommended

Add Additional Magazines

fn five seven ammo

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

Low Capacity Mags (If Required by Law)

EFFEN 90 PS90 Receiver

EFFEN 90 Custom CNC Precision Cut PS90 Billet Receiver

screen-shot-2017-02-22-at-5-55-56-amBuild The PS90 You Have Always Dreamed About!

EFFEN 90 PS90 Custom Billet Receiver is one of those upgrades that will make your PS90 look and perform like a completely different firearm. The EFFEN 90 is an entire upper receiver with its own unique serial number that is as replacement for the Factory FN upper receiver. You have two configurations with the EFFEN 90.  

  1. We can keep the PDS90 a rifle and remove the existing front shroud which will allow us to remove the barrel, spring and charging handle. We then replace the old FN upper receiver with the new EFFEN 90 Billet Receiver and reinstall the 16″ barrel along with the original charging handles and a new 16″ threaded barrel shroud which will add 1/2 x 28mm threads to the front of the 16″ barrel. This option does not require any NFA paperwork but will require the firearm be shipped to an FFL because it is technically a “new firearm” with the new serial number.
  2. If you want to SBR the EFFEN 90, have already applied for the stamp via form 1 or have received the stamp from the ATF and would like to use the EFFEN 90 receiver and SBR kit we can do the conversion for you. We always stock the CMMG PS90 SBR Kit which will require us to remove the original barrel shroud, remove all the parts off the original upper receiver, and swap the parts from the old receiver to the new EFFEN 90. Along with the parts swap we would install the 10.4″ barrel and receiver and PS90 Compensator if desired. If using a firearms trust then laser engraving of the trust name and county is required per ATF rules.
    effen 90

The EFFEN 90 uses the same action and lower assembly as the regular PS90 chambered in the 5.7x28mm cartridge, the FN PS90 utilizes blowback operation and fires from a closed bolt for greater accuracy and reliability. EFFEN 90 PS90 civilian legal 16.04″ cold hammer-forged MIL-SPEC barrel is equipped with an integrated muzzle brake to reduce recoil. Dual magazine latches, cocking handles and an innovative synthetic thumbhole stock with a molded-in sling attachment point help make the .EFFEN 90 PS90 fully ambidextrous. Models with 10 or 50 round polymer detachable magazines are available.

EFFEN 90 PS90 can be upgraded to be one of the baddest firearms ever built, and the upgrades available from FN57SALE are some of the best upgrades available in the entire country. The items listed below have all been personally tested and approved by Matt Adika. In order to be listed on this page, the accessories must meet strict quality control standards like all our accessories, we only sell the highest quality upgrades available for our firearms. You can be assured that when ordering P90 Accessories from our site, that what you purchase will last and work the way it is described every time. All accessories are installed by a FN Certified Gunsmith and tested before we ship the firearm out. Completely customize your rifle anyway you want, with hundreds of different configurations available. The new short stroke hammer and extended magazine release are a must have! Make sure you have extra magazines with upgraded rollers as well. Enjoy!


EFFEN 90 PS90 Rifle or SBR Features:

GENERAL SPECIFICATIONS

  • Semi-auto only
  • Closed bolt, blowback operation

BARREL

  • Hammer-forged, chrome-lined
  • Ported muzzle brake

RECEIVER

  • Bottom ejection port
  • Blowback operated action
  • Billet Aluminum receiver and barrel support

STOCK

  • Synthetic thumb hole bullpup design
  • Forward handstop
  • Molded-in rear sling attachment point

OPERATING CONTROLS

  • Ambidextrous charging handles
  • Sliding trigger
  • Ambidextrous safety switch inside trigger guard
  • Enlarged trigger guard
  • Ambidextrous magazine release

MAGAZINE

  • Translucent polymer body

SIGHT

  • Low Profile rail which can accommodate a RMR. Recommended RMR is the Trijicon RM06 3.25 Adjustable LED Red dot.

Proud FN America Dealer Florida Gun Classifieds

Additional information

Weight 3 lbs
Caliber

5.7x28mm

Magazine

10, 30 or 50 rounds

Weight

14.8 oz.

Barrel Length

16" or 10.4" (SBR)

Overall Length

26"

Sights

None, Has low profile rail on top which fits any RMR. Recommended RM06

EFFEN 90 Model

EFFEN 90 Stripped Upper, EFFEN 90 Stripped Upper with Tri-Rail

Receiver Only or Receiver Installed on New PS90

Receiver Only, Ship Upper Receiver for Professional Installation, Buy New PS90 with Receiver Installed

Shooters Package Upgrade

250 rounds SS197SR – 250 rounds SS198LF – (2) additional 50 round mags w/ delrin rollers – Gen 1 Short Stroke hammer – Extended charging handle, No Package – Rifle Only

Reviews

There are no reviews yet.

Be the first to review “EFFEN 90 – Precision Cut PS90 Billet Stripped Upper Receiver or Converted Rifle”

Your email address will not be published. Required fields are marked *