PS90 Side Rails – Billet Picatinny Rails for Side of Receiver
$60.00
PS90 Side Rails – Billet Picatinny Rails
This and other PS90 accessories available for purchase at FNspecialties.com

PS90 Side Rails allow you to add any accessory to one or both sides of your receiver.
PS90 Side Rails are professionally milled from a solid piece of billet. These PS90 Side Rails are nicer and higher quality than the factory FN rails sold for $60. The PS90 Rails look great and are functional at the same time. They can be directly installed into the PS90 low profile mount for the Trijicon RM06 Adjustable LED 3.25 MOA RMR. If you choose not to use the low profile mount, nuts will be provided to secure the rails from behind.
The PS90 Side Rails come with all the hardware needed to install them on your PS90. They are extremely durable and can withstand the harshest conditions. If you want to add a laser or light to your PS90 then this is the best option. The PS90 Rails allow you to mount whatever accessory right next to your optic setup. This allows you to calibrate the laser/light down your field of vision. The factory option would be to install from on top of the standard rail. You can add the PS90 Side Rails with no permanent modification.
The installation takes about 1-2 minutes and all tools required are included in the package with the PS90 Side Rails. Just remove the factory rail using an Allen-wrench, and install the rails with the lock washers and bolt. Once you tighten down your rails, reinstall the top rail if you don't choose the low profile mount. I would not use the top rail for my optics because it makes your line of sight to high which causes vertical changes at long distances. Our PS90 Side Rails are all custom made by Trijicon's pro shop and are the highest quality side rails available on the market.
#1 in FN Pistols, Rifles and Accessories
Out of stock
ps90 side rails
PS90 Side Rails – Billet Picatinny Rails

PS90 Side Rails allow you to add any accessory to one or both sides of your receiver.
PS90 Side Rails are professionally milled from a solid piece of billet. These PS90 Side Rails are nicer and higher quality than the factory FN rails sold for $60. The PS90 Rails look great and are functional at the same time. They can be directly installed into the PS90 low profile mount for the Trijicon RM06 Adjustable LED 3.25 MOA RMR. If you choose not to use the low profile mount, nuts will be provided to secure the rails from behind.
The PS90 Side Rails come with all the hardware needed to install them on your PS90. They are extremely durable and can withstand the harshest conditions. If you want to add a laser or light to your PS90 then this is the best option. The PS90 Rails allow you to mount whatever accessory right next to your optic setup. This allows you to calibrate the laser/light down your field of vision. The factory option would be to install from on top of the standard rail. You can add the PS90 Side Rails with no permanent modification.
The installation takes about 1-2 minutes and all tools required are included in the package with the Side Rails. Just remove the factory rail using an Allen-wrench, and install the rails with the lock washers and bolt. Once you tighten down your rails, reinstall the top rail if you don’t choose the low profile mount. I would not use the top rail for my optics because it makes your line of sight to high which causes vertical changes at long distances. Our PS90 Side Rails are all custom made by Trijicon’s pro shop and are the highest quality side rails available on the market.